| Quantity: | |
|---|---|
6cSt VHVI Group III+ Synthetic Base Oil
ZMPC
ZMPC 6cSt VHVI Group III+ Base Oil is a deeply hydroisomerized Group III+ synthetic base stock developed for lubricant manufacturers seeking a balance of performance, formulation flexibility and cost efficiency.
With a kinematic viscosity of approximately 6.2 cSt at 100°C, the product is designed to provide a viscosity profile comparable to PAO6 in many lubricant formulation systems. Its high viscosity index, very low sulfur content and undetectable aromatic content make it suitable for modern lubricant formulations requiring high saturation, low impurities and improved environmental performance.
Compared with higher-cost PAO-based formulations, 6cSt VHVI provides a practical PAO6 alternative or partial replacement option, particularly where extreme low-temperature performance is not the primary requirement.
With a viscosity of 6.207 cSt at 100°C, 6cSt VHVI can be evaluated as a replacement or blending component for PAO6 in selected lubricant formulations.
It allows formulators to optimize the base oil system while maintaining the target viscosity range.
A viscosity index of 144 provides stable viscosity-temperature performance and helps maintain effective lubrication across a broad operating temperature range.
This makes the base oil suitable for engine oils, gear oils, hydraulic fluids and industrial lubricants.
The product contains:
Sulfur: <0.5 ppm
Aromatics: Not detected
Water: 40 ppm
Noack volatility: 5.3%
Flash point: 259°C
The low impurity profile supports lubricant formulations requiring high purity and improved environmental compliance.
For applications where the extreme low-temperature performance of PAO6 is not essential, 6cSt VHVI can be considered as a cost-effective PAO6 alternative.
This enables lubricant manufacturers to reduce formulation costs while retaining many of the key benefits associated with high-quality synthetic base stocks.
6cSt VHVI can be used as a base stock or co-base stock for:
Passenger car engine oils
Commercial vehicle lubricants
Gasoline engine oils
Diesel engine oils
Transmission fluids
Automotive gear oils
Its high saturation and low sulfur profile make it suitable for modern lubricant formulations where cleanliness, oxidation stability and emissions-related requirements are important.
Procurement keywords:
automotive base oil supplier, engine oil base stock, synthetic engine oil base oil, 6cSt base oil for engine oil, Group III+ automotive lubricant base stock
For industrial gear oil manufacturers, 6cSt VHVI provides a balanced viscosity and cost-performance profile.
It can be formulated into industrial gear oils, circulating oils and enclosed gear lubrication systems, particularly for applications where extreme low-temperature performance is not required.
Long-tail search terms:
6cSt base oil for gear oil formulation, VHVI base oil for industrial gear oil, synthetic base stock for gear lubricant, PAO6 alternative for gear oil
The viscosity-temperature characteristics of 6cSt VHVI make it suitable for selected hydraulic oil formulations.
Potential applications include:
Industrial hydraulic systems
Machine tools
Injection molding equipment
Mobile hydraulic equipment
General-purpose anti-wear hydraulic fluids
6cSt VHVI can also be evaluated as a co-base stock for selected transmission fluids, driveline lubricants and automotive gear oils, depending on the required additive system and finished-product performance specifications.
The combination of high saturation, very low sulfur and undetectable aromatics makes 6cSt VHVI attractive for manufacturers developing low-sulfur, low-aromatic and environmentally oriented lubricant formulations.
Not every lubricant application requires the full low-temperature capability of a PAO-based formulation.
For mainstream automotive and industrial applications, formulators can evaluate a 6cSt VHVI / PAO6 blended base oil system to balance:
Performance → Viscosity → Oxidation Stability → Regulatory Requirements → Formulation Cost
The appropriate replacement ratio should be determined through formulation testing, additive compatibility evaluation and finished-lubricant performance testing.
This makes 6cSt VHVI particularly relevant to lubricant manufacturers looking for a Group III+ synthetic base stock supplier, PAO6 alternative or cost-optimized lubricant base oil.
Property | Typical Value |
|---|---|
Appearance | Clear |
Density | 820.8 kg/m³ |
Kinematic Viscosity @ 40°C | 32.37 mm²/s |
Kinematic Viscosity @ 100°C | 6.207 mm²/s |
Viscosity Index | 144 |
Pour Point | -33°C |
Flash Point | 259°C |
Noack Volatility | 5.3% |
Aromatics | Not detected |
Sulfur | <0.5 ppm |
Water | 40 ppm |
Typical values are for reference only. Actual product specifications are subject to the applicable Certificate of Analysis (COA).
This product is primarily intended for:
Lubricant manufacturers
Engine oil blenders
Industrial gear oil manufacturers
Hydraulic fluid formulators
Transmission fluid manufacturers
Automotive lubricant distributors
Industrial lubricant distributors
Synthetic base oil importers
Specialty lubricant formulators
Base oil traders and bulk purchasers
自然布局以下采购词，有利于承接海外询盘：
6cSt VHVI base oil supplier
Group III+ base oil manufacturer
6cSt synthetic base oil supplier
PAO6 alternative supplier
PAO6 substitute base oil
synthetic base oil bulk supplier
base oil for engine oil formulation
base oil for gear oil formulation
base oil for hydraulic oil
automotive lubricant base oil supplier
ZMPC 6cSt VHVI Group III+ Base Oil provides lubricant manufacturers with a practical route to optimize formulation cost without abandoning high-quality synthetic base stock technology.
With a 6 cSt viscosity profile, VI 144, ultra-low sulfur, undetectable aromatics and 259°C flash point, it is positioned for mainstream automotive and industrial lubricant applications requiring a balance of performance, purity and cost.
For PAO6 replacement projects, blending optimization or bulk base oil procurement, contact ZMPC for technical data, COA and sample evaluation.
Q: What is 6cSt VHVI Group III+ Base Oil?
A: It is a deeply hydroisomerized Group III+ synthetic base stock with approximately 6 cSt viscosity at 100°C, developed for automotive and industrial lubricant formulations.
Q: Is 6cSt VHVI an alternative to PAO6?
A: It can be evaluated as a PAO6 alternative or co-base stock in selected formulations, particularly where extreme low-temperature performance is not the primary requirement.
Q: What is 6cSt VHVI used for?
A: Typical applications include engine oils, gear oils, hydraulic fluids, transmission fluids and other industrial lubricant formulations.
Q: What are the advantages of 6cSt VHVI over conventional base oils?
A: Key advantages include high viscosity index, high saturation, ultra-low sulfur, low aromatic content, high flash point and a cost-effective synthetic base stock profile.
Q: Who purchases 6cSt VHVI base oil?
A: Typical buyers include lubricant manufacturers, oil blenders, base oil distributors, automotive lubricant companies and industrial lubricant formulators.
Q: Can 6cSt VHVI replace PAO6 directly?
A: The similar viscosity profile makes it suitable for replacement evaluation, but finished lubricant performance depends on the complete formulation, additive package and required specifications. Laboratory validation is recommended before commercial replacement.
